August 25th, 2008
Having enough EverQuest Platinum (also known as EQ Plat) in the game is more important than you may think. Starting out with good EQ Platinum farming tips will certainly have it’s rewards later on the game.
The Ice Giants of Everfrost are a very good source of Platinum. The Ice Giants are mid to high 40 Levels. They have around 3-4K HP or so. They can hit around 114 and they triple hit and duel wield. They are warriors. There are 3 of them that guard the entrance to Permafrost. The camps are referred to as North, South, and Back. Camp names can very from server to server. They can be duo’d by a few mid to low lvl 40’s full group of high thirties, or soloed by 45+ for the soloing classes. They can be good source of Xp at lvl 45 and under. They are light blue by the time you reach mid 50’s.
Share This
Filed under: 313 | No Comments »
June 9th, 2008
Learn the basics of metal casting, different types of metal
casting, and metal casting definitions.
Casting can be defined as a process of
manufacturing, which implies pouring of a ?liquid’ material into ?A Mold’
containing a desired shaped hollow cavity, and then made to solidify. The
ejection or breaking out of the casting then takes place to get the process
completed. The use of casting is ?forming hot liquid metals’ or numerous metals
that are cooled after having the components like clay, plaster, concrete, and
epoxies mixed. Complex shapes are normally made by casting, as other methods
are not feasible. Casting came into being around 6000 years ago. ?Copper Frog’
is the most ancient casting existing till date since 3200 BC. The process of
casting has two distinct subdivisions: non-expendable and expendable mold
casting.
This is a preview of
Metal Casting Information and Basic Metal Casting Information
.
Read the full post (593 words, estimated 2:22 mins reading time)Share This
Filed under: Technology | No Comments »
June 4th, 2008
Learn about the basics of Die Casting, types of Die Casting,
and Advantages of Die Casting.
Die casting is the method used for forcing molten metal into
mold cavities under high pressure. Die casting is very versatile and hence, is
the widest used method for casting a metal. Die casting is same as permanent
mold casting the only difference is that the metal is injected into the mould
at very high pressure of 10-210 Mpa. This results in a more uniform part,
usually good dimensional accuracy and also good surface finish.
This is a preview of
Die Casting Process, Cold Chamber Process, Hot Chamber Process
.
Read the full post (599 words, estimated 2:24 mins reading time)Share This
Filed under: 309 | No Comments »
